Thanks to BLACK+DECKER for sponsoring today’s post, Upcycled Thrift Store Bench for Kids. All opinions are 100% my own.
I finally did it! Inspired by BLACK + DECKER’s “Your Big Finish” initiative, I completed a project I’ve been meaning to do for a while now. A few months ago, I found a little bench while thrift store shopping. It was only $9.99 and it even had a little drawer for storage. I bought it, took it home, and unloaded it into the garage. Months later, which is highly unlike me, it has been sitting there collecting dust. Thanks to this initiative I did this upcycled thrift store bench for kids to complete a reading nook for my daughter!
Here is the little bench BEFORE. Cute, right? I’m unsure if there used to be another part to it or not.
There is even a little drawer for toy or book storage.
- Awesome thrift store find!
- Patch and Primer
- Putty Knife
- High Density Foam
- Needle and thread
- Clean Clothes
There were a lot of scratches, so I used an electric sander to sand down as much as I could. As you can see, there were also a lot of dents and blemishes.
I filled it with a primer plus patch. When doing this, I find it easiest to overfill it and then once it is dry, sand over it to make it smooth.
I cleaned and dusted off all the debris and then spray painted the bench and drawer with a glossy finish.
I also cut some high density foam to size and then covered it with a colorful fabric to make a little seat cushion. I couldn’t decide on what color of fabric. I think that’s why it took me so long to do this project. So, I asked my Facebook friends and I listened to what they had to say! I mean come on, you need to be comfy while reading!
It turned out so cute, and now my daughter’s reading nook in her bedroom is complete!
Here are a couple more photos!
ENTER TO WIN!
BLACK+DECKER has launched a movement to get all the unfinished home projects moving again. Join them for the opportunity to win $10,000 cash and products. Plus, they might put you and your finished project on a billboard right in the middle of Times Square. So while your family may never notice that you finished hanging the crown molding, millions of others will!
There are Weekly Prizes, at approximately $439.91 per prize, and one Grand Prize of $10,000. The Weekly Prizes include one of each of the following:
BLACK+DECKER prize package comprised of one (1) of each of the following:
- BDCDE120C 20V MAX* Lithium Drill/Driver with AutoSense™
- BDEMS600 Mouse Sander
- BDCS40BI 4V MAX* Lithium Pivot Screwdriver
- BDCDCMT120 Matrix 20V MAX* Lithium Drill/Driver
- LCS1020 20V MAX* Chainsaw
- BDCMTRS Matrix Reciprocating Saw Attachment
- BDCMTI Matrix Impact Driver Attachment
To enter, visit the campaign landing page, and enter your First Name, Last Initial, Email, City, State, Phone and upload a photo of yourself and your completed project!
The contest ends December 28th, 2014.
You can visit the Finished Project Gallery to browse entries and get inspiration for your own projects.
Thank you to BLACK+DECKER for sponsoring this post and inspiring me to FINALLY finish this project!